|
| |
| |
| Quick And Easy Installation |
 |
 |
 |
INSTALLATION - DO'S AND
DON'Ts
- Install with minimum exposure to sunlight.
- Solidifying of liquid in the pipe might occur in cold temperatures. Avoid
freezing temperatures.
- When bend radius is less than five times the outer diameter, elbow joint
should be used for connection.
ASSEMBLING & FIXING
- Priory ensure work site is reasonably clean. Cap pipe-end as necessary
to keep out mud, sand and earth.
- All laying or installing to comply with work drawings.
- Straighten pipe where necessary on level ground. For small diameters,
straightening best done manually. Preferably use a socket at intervals of
600 to 1000mm diligently.
- Bending the pipe : insert spring into pipe; bend slowly. Later, draw out
the spring. Where done manually, the bend radius should not be less than
five times the size of outer diameter. |
|
